Hand-Held Refractometers & Optical Instrumentation

Hand_Held_and__Optical_Instrumentation_2012-v1-1Hand-Held Refractometers

  • E-line Economy Range
  • Eclipse Professional Range
  • E-Line 80 Refractometer
  • OPTi Digital Range
  • Dual Scale Models
  • Single Scale Models

Abbe Refractometers

Model D7 Polarimeter

E-Line Gemological

  • Application Specifi c Test Kits
Attachments:
FileFile size
Download this file (Hand_Held_and _Optical_Instrumentation_2012-v1.pdf)Hand_Held_and _Optical_Instrumentation_2012-v1.pdf992 Kb
 
Peak Pressure Indicators

peak_pressureLEMAG® LS Peak Pressure Indicators are measuring the firing pressure of internal-combustion engines. In order to be free of residues, the indicator valve should be shortly blown through before starting the measurement. To take readings the instrument has to be connected to the indicator valve by means of a standarized connecting nut.

The LEMAG®-LS Peak Pressure Indicator is now ready for use. When the indicator valve is open the pressure gauge will rise and will remain on the maximum. By notice this value, this indicator valve must be closed and the instrument has to be reseted by using the vent screw fixed at the side. After that, the LEMAG® LS is ready for taking new readings.

Attachments:
FileFile size
Download this file (Peak pressure indicator type LS.pdf)Peak pressure indicator type LS.pdf235 Kb
 
High Speed Indicator Type 25-M

High_Speed_Indicator_25_M-2The LEMAG® High Speed Indicator Type 25-M is used in cases where the speed of the engine is too high or the pressure rise is too steep for engine indicators type 30-M or type 50-M.

Due to it’s special construction it is possible to prepare diagrams for engines which are running at high speed. The extended pressure area allows measurements to be taken on engines up to 220 bar maximum pressure without having to chance the piston and cylinder.

Attachments:
FileFile size
Download this file (High_Speed_Indicator_25_M.pdf)High_Speed_Indicator_25_M.pdf218 Kb
 
Indicator Type 50-M3
Indicator_type_50_M3-1LEMAG® Indicator Type 50-M3 are the result of consequent redesign of the well known LEMAG® Indicator Type 50-M2 series.

They are for use and application to draw diagrams on slow speed Diesel-Engines (≤ 250 Rpm).

The LEMAG® Indicator Type 50-M3 is available for pressure ranges up to 300 bar. The pressure ranges are acc. to current latest engine developments.

New features:
– insulated grip-handle
– fully protected writing
– system etc.

Attachments:
FileFile size
Download this file (Indicator_type_50_M3.pdf)Indicator_type_50_M3.pdf216 Kb
 
TYPE XX ELECTRONIC INDOCATOR
PREMET_XX-1

The electronic indocator LEMAG PREMET XX is the answer to a cost-effective entry to the electonic indocator technology market.

Reliable and robust LEMAG quality ia a compact device that can be used on all engines with indicator valves.

No lengthy training or setup procedures are necessary. The self-explanatory menu prompts on the colour LCD display guide the user through the measurment using only four buttons.

Attachments:
FileFile size
Download this file (PREMET_XX.pdf)PREMET_XX.pdf442 Kb
 
ELECTRONIC CYLINDER PRESSURE INDICATOR
PREMET_C-2The new LEMAG PREMET® C is a state of the technology electronic cylinder pressure indicator. All measured data can be evaluated immediately on the high resolution colour display, including all the curves and diagrams previously only known from computer based evaluation software. The simple and self-explanatory software structure allows this versatile instrument to be operated using only four robust stainless steel buttons.
Attachments:
FileFile size
Download this file (PREMET_C-2.jpg)PREMET_C-2.jpg254 Kb
Download this file (PREMET_C.pdf)PREMET_C.pdf1822 Kb
 


Get in touch!

Address: 3 Leoharous Str.
Tel:
+30 210 4127236
Fax:
+30 210 4113374
E-mail:
info[at]binbir.gr
  • Official Representative of
  • Official Representative of
  • Official Representative of
  • Official Representative of
  • Official Representative of